Clear Epoxy Wood
 |
No items matching your keywords were found.
|
 |
EPOXY Adhesive -ULTRAFAST 5 minute- Crystal Clear-NIP- Wood,Glass, Metal & More |  |
 |
US $2.89 | 21d 15h 29m |
 |
Evercoat 108017 Epoxy Glue Syringe - Clear repairs wood, metal, glass ceramic | |
|
US $19.99 | 11d 19h 52m |
 |
Versachem 5 Minute Epoxy Max Clear Industrial FIBERGLASS GLASS METAL RUBBER WOOD | |
|
US $9.50 | 19d 12h 45m |
| Powered by phpBay Pro |
Clear Epoxy Wood
thick coatings available for old hardwood floor?
Does anyone know of a clear coating, maybe an epoxy that I can use to build up an old hardwood floor that is beginning to have cracks lift in places. I'm thinking of something like what they have in Disney land in Mickey and Minnies houses. If you haven't been there it is about a 1/4" thick on top of hardwood and takes dirt/moisture amazingly well. I am unable to simply nail down the cracks as the wood on the groove top is the problem and it is just too thin. The floor is 150 year old 1/4 sawed fir in a historical home so bylaws make it tough to replace. thanks
Hi first I recomend that if you only want to re-coat the floors in very improtant that you find out what kind of finish you have in your wood floors you can test the finish and check you floors doing this
If the floor was installed, or last serviced, before the mid '60s, you should assume the finish used was varnish or shellac. To determine this, scratch the surface with a coin or other sharp object in a corner or other inconspicuous space. If the finish flakes, it is probably shellac or varnish. Shellac and varnish are rarely used anymore and require full sanding to remove before application of a surface finish or wax finish.
Next, check the floor for wax finish. In an inconspicuous area, corner or behind a door, apply two (2) drops of water. If, within ten minutes, white spots appear under the drops of water, the floor has a wax finish. To remove the white spots, gently rub the spots with #000 steel wool dampened with wax.
If the finish does not flake from scratching with a coin and white spots do not appear from the drops of water, the floor has a surface finish and should be maintained accordingly.
Follow these steps to evaluate the condition of your hardwood floor and its finish.
Finish Condition
Has the finish been worn off or is it just dirty? See if the finish is dull, chipped, scraped or gouged. To test if the finish has worn off, begin in a high-traffic area and pour one to two tablespoons of water onto the floor. If the water soaks in immediately and leaves a darkened spot, the finish is worn and water can damage the wood. If the water soaks in after a few minutes and darkens the wood only slightly, the finish is partially worn. If the water beads on top, the surface is properly sealed. Repeat this test in low- and medium-traffic areas.
Wood Condition
It the finish is worn, the wood may have been damaged. Are there stains, burns, cuts, gouges, holes, cracks or warped boards? If the wood is damaged, repair or replacement may be required before you deep clean your floor or apply a maintenance coat.
the finish in A high area like disney usually are a Oxygen-crosslinking, 100% polyurethane waterborne formula with extraordinary
performance, ease of application and durability.
if you looking for something as hard as epoxy you can used
Bona Traffic® a 2 component floor finish is the latest generation of waterborne polyurethanes.
Formulated specifically for heavy traffic commercial and residential hardwood floors, Traffic
provides unsurpassed durability in a wood floor finish.
For trained, experienced professional use only.
you can check
http://www.floorsincalifornia.com the resources page
good luck!
|
No items matching your keywords were found.
|
|
EPOXY Adhesive -ULTRAFAST 5 minute- Crystal Clear-NIP- Wood,Glass, Metal & More | |
|
US $2.89 | 21d 15h 29m |
|
Evercoat 108017 Epoxy Glue Syringe - Clear repairs wood, metal, glass ceramic | |
|
US $19.99 | 11d 19h 52m |
|
Versachem 5 Minute Epoxy Max Clear Industrial FIBERGLASS GLASS METAL RUBBER WOOD | |
|
US $9.50 | 19d 12h 45m |
| Powered by phpBay Pro |
|
|
Gal Clear Epoxy Paint $104.94 Gal Clear Epoxy Paint Top Secret Coatings TS-100 1-Part Epoxy Paint - GAL CLEAR EPOXY PAINT |
|
|
J-B Weld Mini 5 Minute Clear Epoxy $2.79 J-B MINI CLEAR EPOXY SYRINGE 1 time use - 5 minute set clear epoxy Adheres to metal, wood, tile, ceramic - glass and china 6 ML syringe Model: 8212-S SIZE:0.2 Oz. Manufacturer: J-B WELD COMPANY |
|
|
Quick Set Epoxy-.85 Ounce(Pack of 1) $11.38 Quick Set Epoxy-.85 Ounce. HENKEL-Quick Set Epoxy. This epoxy adhesive sets clear in 5 minutes and bonds wood; metal; ceramic; glass; most plastics and tile. It has a high strength and water/solvent resistant bond. The dual syringe means the perfect me |
|
|
Eclectic Products Goop Anti Skid Epoxy With Grit Grit, Clear $15.99 Eclectic Products Goop Anti Skid Epoxy With Grit Grit, Clear . Enhances safety aboard by providing a hard, flat, textured, non-skid finish that is friendly to bare feet on properly prepared wood, concrete, metal, fiberglass and more. Base Type: One-part epoxy aerosol spray Recommended Use: Non-skid coating Coverage: Up to 15sq.ft. per can Drying Time to Touch: 10-20 min. Recommended Primer: None Quantity: 11oz. Applies Over: Properly prepared wood, concrete, metal, fiberglass, tiles, porcelain and more |
|
|
T-88 Structural Epoxy Adhesive Cartridge $24.94 T-88 Structural Epoxy Adhesive Cartridge T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations. Mixed at a ratio of 1:1 by volume Will cure at temperatures as low as 35F Unaffected by water, oil, kerosene, and many other chemicals when fully cured Immune to fungus and rot May be applied to damp wood, provided it is worked well into the surface |
|
|
Boatlife Git Rot Penetrating Epoxy 16 Oz $45.99 Boatlife Git Rot Penetrating Epoxy 16 Oz . Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Cures overnight. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Two parts in each package: resin and hardener. Formulation: Two-part penetrating epoxy sealer Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores Provides structural reinforcement Coverage: Volume required for saturation about half the volume of rotted wood Color: Clear amber Drying: 1/2 hr pot life, overnight dry to touch, one week to full strength Color: Clear amber |
|
|
Boatlife Git Rot Penetrating Epoxy 4 Oz $19.49 Boatlife Git Rot Penetrating Epoxy 4 Oz . Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Cures overnight. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Two parts in each package: resin and hardener. Formulation: Two-part penetrating epoxy sealer Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores Provides structural reinforcement Coverage: Volume required for saturation about half the volume of rotted wood Color: Clear amber Drying: 1/2 hr pot life, overnight dry to touch, one week to full strength Color: Clear amber |
|
|
J-b Weld J-b Weld Jb Mini Epoxy 8212-S $2.28 Jb mini epoxy 5-minute clear epoxy syringe 1 time use Adheres to wood, metal, tile, ceramics, jewelry, glass, and plastics 5 minute set time 0.2 fl. oz Brand #: J-B Weld 8212-S UPC: 043425821256 Keywords: jb weld mini epoxy clear j b |
|
|
West Marine Penetrating Epoxy 4 Oz $33.99 West Marine Penetrating Epoxy 4 Oz . Repairs dry-rotted wood and restores its strengthTwo-part liquid epoxy deeply penetrates, saturates and seals dry-rotted wood, actually restoring its structural strength. Repair transoms, decking, stringers and molding. Also stops hidden leaks. Can be sanded and painted. 2:1 mix ratio (by volume). Formulation: Two-part penetrating epoxy sealer Recommended Usage: Sealing and isolating dry-rot Drying: Work window of 60 min., overnight curing Color: Clear amber |
|
|
West Marine Penetrating Epoxy 16 Oz $52.99 West Marine Penetrating Epoxy 16 Oz . Repairs dry-rotted wood and restores its strengthTwo-part liquid epoxy deeply penetrates, saturates and seals dry-rotted wood, actually restoring its structural strength. Repair transoms, decking, stringers and molding. Also stops hidden leaks. Can be sanded and painted. 2:1 mix ratio (by volume). Formulation: Two-part penetrating epoxy sealer Recommended Usage: Sealing and isolating dry-rot Drying: Work window of 60 min., overnight curing Color: Clear amber |
|
|
1365868 - Loctite Epoxy Instant Mix - 0.47 Fl Oz - Clear $12.5 Self-mixing, epoxy syringe is a must for bonding jagged and poor-fitting surfaces. Two-part adhesive includes an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high-strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Use on metal, wood, ceramics, stone, glass, tile and most plastics. Epoxy does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. [LOC1365868] HAZMAT UPC: 075353069240 UNSPC: 31201610 0.14 LB |
|
|
Loctite 1365868 Instant Mix Epoxy .47 oz $20.83 Easytouse selfmixing dispenser and precision applicator. Highstrength formula bonds wood metal tile ceramic glass plastic and more. Final bond is high strength and weather water and solventresistant. Sandable and paintable. Adhesive Type: Epoxy; Color Dried: Clear; Color on Application: White; Washable: N/A. |
|
|
Itw Consumer Devcon Itw Consumer Devcon 1oz 5-min Epoxy S-205 $2.72 1oz 5-min epoxy Makes clear, fast epoxy repairs Set in 4 to 7 minutes, works even in low temperatures Bonds metals, wood, masonry, ceramic, china, and glass 1 oz Brand #: ITW Consumer/ Devcon S-205 UPC: 078143205453 Keywords: epoxy 5 min |
|
|
Itw Consumer Devcon Itw Consumer Devcon 2.5oz 5-min Epoxy S-206 $4.64 2.5oz 5-min epoxy Makes clear, fast epoxy repairs Set in 4 to 7 minutes, works even in low temperatures Bonds metals, wood, masonry, ceramic, china, and glass 2.5 oz Brand #: ITW Consumer/ Devcon S-206 UPC: 078143206450 Keywords: epoxy 5 min |
|
|
Itw Consumer Devcon Itw Consumer Devcon 9oz 5-min Epoxy S-209 $10.59 9oz 5-min epoxy Makes clear, fast epoxy repairs Set in 4 to 7 minutes, works even in low temperatures Bonds metals, wood, masonry, ceramic, china, and glass 9 oz Brand #: ITW Consumer/ Devcon S-209 UPC: 078143209451 Keywords: epoxy 5 min |
|
|
Itw Consumer Devcon Itw Consumer Devcon 2-ton Epoxy Syringe S-31 $2.72 2-ton epoxy syringe Sets in 30 minutes 2 drops will hold 2 tons Hardens to a crystal clear finish Adhesion to all metals, glass, wood, etc Semi-flexible Brand #: ITW Consumer/ Devcon S-31 UPC: 078143313455 Keywords: epoxy syringe 2 ton |
|
|
Itw Consumer Devcon Itw Consumer Devcon 60sec Flowmix Epoxy 21445 $3.4 60sec flowmix epoxy Flow-mix applicator allows you to dispense mixed epoxy which can be applied directly to the surfaces to be glued Flow-mix nozzle twists on securely to dispense mixed epoxy product Makes clear, fast epoxy repairs Sets in 60 seconds Bonds metal, wood, masonry, glass, plastic, and rubber 1/2 oz. syringe, includes 2 nozzles P.S.I. strength: 1250 lb Waterproof Brand #: ITW Consumer/ Devcon 21445 UPC: 078143214455 Keywords: epoxy 60 second syringe flow mix |
|
|
West System #105 Epoxy Resin A Resin, Qt. $39.99 West System #105 Epoxy Resin A Resin, Qt. . 105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing." The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash poin |
|
|
T-88 Structural Epoxy Adhesive Kit 8Oza+8Ozb $28.94 T-88 Structural Epoxy Adhesive Kit 8Oza+8Ozb T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations. Mixed at a ratio of 1:1 by volume Will cure at temperatures as low as 35F Unaffected by water, oil, kerosene, and many other chemicals when fully cured Immune to fungus and rot May be applied to damp wood, provided it is worked well into the surface |
|
|
T-88 Structural Epoxy Adhesive 1/2 Gal Kit $86.94 T-88 Structural Epoxy Adhesive 1/2 Gal Kit T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations. Mixed at a ratio of 1:1 by volume Will cure at temperatures as low as 35F Unaffected by water, oil, kerosene, and many other chemicals when fully cured Immune to fungus and rot May be applied to damp wood, provided it is worked well into the surface |
| Account limit of 2098 requests per hour exceeded. |
Epifanes Gloss Clear Varnish Product Demo
Problem solved, "D", !
I had tables like this at one time and I agree, the grooves collect crud and hard to clean out. Do this; Mask the grooves off on each side and fill in with liquid plastic, let harden. Ace hardware here, where I reside, carries liquid plastic by the can or spray on. Comes in various colors including black and clear. Problem solved.